Purisystems Air Filtration System 3-Speed Remote, Built-in Ionizer, PuriCare 1100IG Hanging Air Filter w/RF Remote for Woodworking, Garage, Shop Dust Collector, up to 1100 sq. ft (1100 CFM)

Model : PuriCare 1100IG

5.0 Average

$329.00 List Price: $450.00

Coupon:

PuriCare 1100IG Air filtration System compared to PuriCare 1100, its unique double ionization technology produces equal amounts of positive and negative ions. Particles in the air are charged by ions, which cause the particles to aggregate and be captured by the filter. And the trace amounts of ozone produced during operation can neutralize harmful pollutants and odors. Even in a 1100 sq. ft.carpenter's shop/DIY house,the device also works great.

Highlight: Built-in ion generator/Remote control with a built-in timer/Sheet metal spray shell/Automatic operation function

Buy on Amazon AlorAir.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, AlorAir.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

【IMPORTANT】 Does not meet California air cleaner regulation requirements; cannot be shipped to California.

Product Overview

PuriCare 1100IG Air Filtration System/Dust Collector Built-in Ionizer
The unit comes equipped with a powerful 1/8 horsepower motor that can operate at one of three speeds (i.e.650, 850, or 1100 CFM) depending on the situation. It is easy to switch between them. Additionally, the system can efficiently handle particle dust, sawdust, and pet sawdust, among others, above 0.001mm. The lightweight design weighs only 33 pounds and can be combined with the cleverly designed buckle structure and eye bolts on both sides. It is easy to move and install and can meet your unique, complex needs. PuriCare 1100IG enables you to breathe cleaner, safer air with confidence. Of course, it's not just that!

 

Features

· cETL Certified
· Sheet metal spray shell with strong corrosion and wear resistance, ensuring that it can withstand harsh environments
· 1/8HP powerful motor with special overload protection and strong airflow to avoid
· Potential fires and explosion hazards
· Sturdy fan blades that reduce noise and increase airflow
· Noise below 66dBA, which is equivalent to a quiet office, according to the U.S.
· Department of Health and Human Services
· Two control modes, with three-speed control / PM 2.5 Setting
· Three speeds: 650, 850, or 1100 CFM per minute
· One-micron filter and five-micron pre-filter that is easy to clean and replace
· Built-in ion generator
· RF remote control with a built-in timer (e.g., 1/2/3/4/5/6 hours), which works up to 26 feet
· Automatic operation function with continuous operation at the highest wind speed by default (e.g. red/yellow/green)
· Simple color bar shows the surrounding air quality
· With the working time timer, you can check the working time of the equipment and consider whether to keep it on
· Cleverly designed buckle handles on both sides, which make it easy to move and install
· Two simple top-fixing structures:
Method 1: Four eyebolts are suspended from the ceiling
Method 2: Screw the machine to the wall with four M4 screws

· Rubber feet prevent the system from marking surfaces

 

Benefits

Maintain Lung Health
Inhaling wood dust has been linked to many diseases, such as dermatitis, asthma, various allergies, and cancer. However, simply having a dust collector in your workshop will not provide sufficient protection against this dire consequence. Air filtration systems designed for woodworking workshops can purify the air by capturing particles as small as 0.001 mm. Dust collectors cannot capture particles of this size. Thus, without using an air filter, you risk exposing yourself to life-threatening wood chips that are too minuscule to be caught by other purification systems.
Improve Your Mood
Dual-ion technology charges air particles with extra electrons, dispersing negative ions for deep cleaning. It also minimizes dust, dander, pollen and other allergens and pollutants. It will bring you a pleasant experience.
Clean Your Workshop Even When You Are Away
It makes sense to keep the PuriCare 1100IG running after you've left the workshop, but the last thing you want is to leave the unit running all day without needlessly draining power while you're away. With the auto-off feature, you can choose between one and six-hour timers with the included RF remote to clean the air. Thereafter, the system will shut down independently. Avoid having out-of-control electricity bills.
Easy Installation, Simple Operation, and Low Maintenance Cost
The PuriCare 1100IG Filtration System is pre-assembled, so you solely need to determine where to place the unit. Be sure to check out our instruction manual. It's easy to operate and doesn't take much time to learn. When it comes to maintenance, the system doesn't require much attention other than occasional filter changes and weekly cleaning.

Motor 1/8 HP, 115 V/60 Hz, 2.1 A
Airflow 650, 850 and 1100 CFM
Size For 1100 Sq.Ft
Noise <66 dBA
Outer Filter 5 micron
Inner Filter 1 micron
Power Cord 6.5 ft
Dim (L×W×H) 24.6 x 20.1 x 10.6 in
Shipping Dim(L xW xH) 27.3 x 22.9 x 12.6 in
Weight 33 lbs
Shipping Weight 39.2 lbs
Loading Quantity 20': 224 Sets; 40': 476 Sets; 40'HQ: 540 Sets

Applications
An air filter would be a great lifesaver for anyone with sensitive skin, allergies, asthma or other respiratory issues. You never know when your staff/customers will get sick from the dust flying all over the store.

The PuriCare 1100 IG is designed to improve air quality in medium to large woodworking or metalworking workshops (i.e. saws, sanders, planers). It is specially strengthened in motor and air volume, which can absorb pollutants from machines, pads, tools, walls and windowsills more efficiently.

Additionally, its unique double ionization technology makes particles in the air charged by ions, causing them to aggregate and be captured by the filter. At the same time, active oxygen is generated to remove odors, volatile organic compounds (VOC) from tobacco, food, pets, paints, mold and mildew, and even carcinogenic formaldehyde emitted from furniture, laminate floors, and wooden cabinets. This makes it perform better than HEPA filter.

The system also works well in similar environments such as renovations, warehouses, salons, print shops, and other enclosed spaces.


Proper Use and Maintenance 
Safety Instructions

The power cord of the machine must be plugged into a grounded socket. 
The power supply of the machine must not be higher than the specified power supply. 
Do not use the machine after there is water inside the machine. 
The machine should not be installed outdoors or in places that may be eroded by Rain Water to avoid electricity leakage and fire. 
Do not run the machine without a filter installed 
Refrain from moving the unit during operation
Do not place a shield within the 600mm around the air inlet and outlet of the product.
The machine has to be disconnected from power before it can operate internally. 
If hooks are installed on the ceiling, the load-bearing capacity of the ceiling must be greater than 110 lbs. 
If the dust collector is to be installed on the ceiling, the distance between the bottom of the dust collector and the ground must be greater than 7in. 
Installation requires two people.  


Maintenance and Cleaning

Under poor air quality, there will be a lot of dust in front of the control panel, which needs to be cleaned up.

Disconnect the power supply before cleaning.
2. Open the cover next to the button on the machine control panel
3. Use a brush to dust the lid. Then put the lid on and plug it in.

Reviews & Questions

100% of customers recommend this item

4 Ratings
5.0 Average
5 Stars
500% Complete
4
4 Stars
NAN% Complete
0
3 Stars
NAN% Complete
0
2 Stars
NAN% Complete
0
1 Stars
NAN% Complete
0
Great product
By 'Dave', Reviewed on September 09, 2022
One of the most satisfying points for me is that the PuriCare 1100IG remains running after you leave the workshop, but with the auto shut-off feature, you can select a timer of 1 to 6 hours to clean the air with the included RF remote control. Thereafter, the system will shut off independently, which avoids incurring runaway electricity bills. This feature really suits me, as I am a busy person who tends to forget things. It is also worth saying that this machine is really effective in the function of sawdust collection.
Excellent product and amazing customer service
By 'Asher', Reviewed on July 29, 2022
The unit I purchased is good. It works the way it is supposed to. It’s an air purifier. What’s even better is the customer service I received when I called this company. if I could give them ten stars, I would. There’s super polite, helped me, and were very prompt with their service. Highly recommended. If the unit were $20 more, I would still buy from them because of their service. Worth every penny.
Humanization design, portability
By 'Micheal', Reviewed on July 09, 2022
This dust collector can be easily fitted on a benchtop or other work surface where dust is being produced (Easy carrying handles allow easy mobility, rubber feet prevent marring). Built-in RF remote controller allows for operation from any angle of the room.
Cleared my workshop of air born dust in no time
By 'Grant', Reviewed on July 08, 2022
It works so well I will have to replace the outside paper filter often, I like this unit. I breathe a little easier now.
6

Questions

Can this help with fumes from paints?

Alorair on May 15, 2023

1 Answer

Answered by Alorair
It may depend on the amount of air you need to move. In our application we were just trying to remove dust.
I could use some help. I want to set up an air filtering system in my wood shop. Is it important to have a dust collector and a purifier?

Alorair on May 06, 2023

1 Answer

Answered by Alorair
Yes, having a good dust collector and air purifier in my opinion is a must! The dust collector is your immediate source capture when cutting, planing or sanding. Not everything is taken by the dust collector. The intent of the air purifier is to get the fine particulate that can float in the air in your shop for hours. Bottom line, protect your lungs. Wear a good mask in addition to the other two devices. Dust collector, consider a 2 stage. I use an Oneida Super Dust Deputy and Laguna Bflux.
Where are replacement filters available? Are they the same filters as Jet?

Lesley on September 09, 2022

1 Answer

Answered by Alorair
Replacement parts will be provided by contacting the company's support team. And the size of the filters can be referred to ASIN, respectively B09V4FLMN6 B09V6QHBKM
Does this come with a schematic? are there replacement parts for the controller board? This is a common issue with jet and jdr units.

Asher on July 29, 2022

1 Answer

Answered by Alorair
Yes, the user guide will have its schematic. Replacement parts will be available by contacting the company support team.

Related Products