G3 Fillter, MERV-8 Filter

G3 filter captures the majority of “larger” airborne particles after the air is blew into the machine. Thus the airflow can be powerful with less wind resistance and larger contaminants is moved away. 

Remote Controller

Sentinel Dehumidifiers can be controlled using an optional remote accessory. The Sentinel Remote Control connects to your Sentinel Series Dehumidifier via a 25’ CAT 5 cable.

Inlet Ducting for CleanShield HEPA 550 Air Scrubber, Easy Storage

It is produced for use on the ducting inlet on Clean Shield HEPA 550. It features 16-inch semi-rigid ducting which can be stored in a protective case after compression.

HEPA/Activated Carbon Filter Replacement set for CleanShield HEPA 550 Air Scrubber

This HEPA/Activated Carbon Filter is designed for use in the AlorAir CleanShield HEPA 550 Air Scrubber. Installing this filter equips the HEPA 550 to capture a wide variety of volatile organic compounds (VOCs), including soot and smoke, food odors, fumes from paint and paint thinners, sewer odors, and many other compounds. 

MERV-8 Filter for Clean Shield HEPA 550

▼ This filter is the 1st stage pre-filter used in the AlorAir Cleah Shield HEPA 550 Air Scrubber. 

▼ This MERV-8 Filter is made of synthetic fiber filter media.

▼ The  MERV-8 Filter measure 14.8" x 13.7" x 0.8".

▼ For MERV-8 Filters: Replace as necessary- we recommend checking the filters at least 1x/year.

▼ No modification of the AlorAir CleanShield HEPA550 Air Scrubber is required-users simply place the new MERV-10 filter and then re-secure the cover.

AlorAir Dehumidifier Aluminum foil Outlet Duct with a Diameter of 6 inches and 11.5 feet Long (6")

When layflat ducting is connected to the air outlet, it can change the air direction. It adopts aluminum foil for the outlet of airflow. This ducting is mainly used 5.9 in.

BACK PANEL INTAKE DUCT COLLAR ASSEMBLY

You could purchase our back pannel which is able to connect with the inlet duct if you have bought our dehumidifier HD90/HDi90.

AlorAir PE Ducting with Stainless Steel clamp dehumidifiers (5.9 in.)

When layflat ducting is connected to the air outlet, it can change the air direction. It adopts durable polyethylene material with lightweight but with very satisfactory elasticity and flexibility performance. This 4-mil ducting is mainly used in dehumidifiers and it is unaffected by moisture and most chemicals. The length of layflat is optional for cutting. It is 6.5 in of wide when it is flat while changes to 5.9 in after inflating.

Storm Elite MERV-8 Filter

MERV-8 filter captures the majority of “larger” airborne particles after the air is blew into the machine. Thus the airflow can be powerful with less wind resistance and larger contaminants are moved away. 

It can protect blowers, coils, fans and other inner components from the congestion of impurities from the air taking in from outside. Also at the same time ensure the maximum airflow supply volume. 

Activated Carbon Filter

Activated Carbon Filter for Storm Elite Dehumidifier

OUTLET DUCTING WITH TURBODUCT

Product Specifications

It is produced for use on the ducting outlet on Clean Shield HEPA 550. TurboDuct with lots of features like anti-static, resistant to mold, mildew, corrosion and UV damage can help to extend the application of Cleanshield HEPA 550. It adopts PVC-coated polyester with good quality.

ALUMINUM FOIL INTAKE DUCT 12 INCHES DIAMETER 13 FT LONG

Aluminum foil intake duct with a diameter of 12 inches and 13 feet long with stainless steel duct clamps assembly for Sentinel HD90/HDi90

When layflat ducting is connected to the air intlet, it can change the air direction. It adopts aluminum foil for the inlet of airflow. This ducting is mainly used in dehumidifiers it is unaffected by moisture and most chemicals.

The ducting diameter is12 in.