AlorAir 780CFM Stainless Steel Crawl Space Fan IP55 Rated Ventilation Fan with Thermostat, Built-In Isolation Net 9.13 Inch Foundation Vent Fan for Garage, ETL

Model : VentirMax 780S
$129.11 List Price: $139.11

Coupon:

The VentirMax 780S basement fan has a built-in frost protection thermostat that automatically shuts the unit off when it reaches a certain low temperature. There is also a built-in insulation net to prevent reptiles and extend the life of the fan.

Highlights: IP55/ Isolation Mesh/ Anti-freeze Thermostat/ 2 Years Warranty

Categories:Ventilation Fans
Product Overview

AlorAir VentirMax 780S Ventilation Fan

This stainless steel basement room fan is a comprehensive ventilation device. The fan has an IP55 certified film that effectively prevents rust. In addition, a frost protection thermostat is built in so that the unit automatically stops operating at low temperatures. It is also equipped with an 8mm thick insulation mesh, which can prevent reptiles from entering, reduce humidity and prolong the fan's life. In short, this fan is a safe, practical and efficient ventilation device, which is suitable for various scenarios and is your best choice for ventilation.

 

Features
· Features intelligent control panel, easy to set humidity for running, support 10%-80% RH control range.
· Equipped with stainless steel insect nets, Prevents reptiles from entering fans and spaces more effectively.
· IP55 waterproof and dustproof features and stubborn stainless steel shell make it ideal for work in a humidity environment.
· Shell make it ideal for work in a humidity environment.
· Limited noise and quiet operation.
· Upgraded humidity-resistant motor.
· Built-in dehumidifier & freeze protection thermostat. 
· The dehumidifier control will stop operating if the freeze protection thermostat senses low outdoor temperatures.

 

Benefits
Freshen indoor air - If you're tired of smelly basements, you should install a ventilation fan. Ventilation fans help you keep the air inside your home fresh by removing airborne contaminants such as ammonia and other odor-causing chemicals to eliminate odors.

Prevents mold contamination - Mold and viruses can easily thrive in dark spaces. AlorAir crawl space ventilation fans keep your basement cool and dry with 780 CFM airflow. Especially if your basement has no windows, it can renew the air inside.

Helps bathroom cleaning - It is difficult to clean a bathroom thoroughly if there are always contaminants in the air. Installing a ventilation fan helps keep the bathroom clean and dust-free because it helps suck up dust and dirt from countertops and floors.

Cost Saving - Our high-power ventilation fans are compact and portable, and can increase air circulation in any room. This means you can install it in any space you need to dehumidify at the moment, and our panels can be trimmed to match non-standard foundation openings.

Power 115 V/ 60 Hz, 68 W
Current 0.65 A
Airflow 780 CFM
Size for 1,300 sq.ft
Noise Level <55 dBA
Functioning Temperature Range 37-158℉
Functioning Humidity Range 10~80%
Power Cord 6 ft
Weight 9 lbs
Dimensions (L x W x H) 16 X 11.9 X 4.4 in
Shipping Weight 11.1lbs

Application
The VentirMax 780S uses updated humidity-resistant motor to create 780 CFM airflow while maintaining low noise. This crawlspace fan is designed to allow fresh outdoor air to circulate under the house and porch. The high humidity that circulates the crawl space is the main reason for the premature decay of the support column, joist, floor, and crossbeam support of the home.
Humidity can promote the growth of fungi and increase the activity of termites. Humidity can also cause pipeline failure due to rust and corrosion. The continuous operation of the fan helps to vent radon, gases from treated wood and other odors that may spread to the living area. Controlled by a circuit board, the dehumidifier control fan starts when the relative humidity is higher than the selected set value higher than the selected set value.

 

Proper Use and Maintenance
INSTALLATION MATTERS: Crawlspace fans must be installed in electrical control boxes and motors facing inside the crawlspace.
1. Confirm that the doors and vent covers of the buildings around the installation are open.

2. In order to ensure the stable installation of the crawling space ventilator, it is necessary to mark four points on the wall to confirm the installation position.

3. Install the crawl space ventilation fan to the wall with 4 screws and observe the horizontal direction of the fan.

4. Note: If the mounting surface is a base block or brick. Before the fan is installed, a 5/16-inch hole needs to be drilled with a masonry drill bit. Install wall anchors at the openings and secure them.

If installed on a mesh of wood aggregate, edge joists, or existing crawlspace vents, secure crawl space vents with screws, washers, and nuts at the four corners of the metal panel of the vent.

Reviews & Questions

0% of customers recommend this item

0 Ratings
0.0 Average
5 Stars
NAN% Complete
0
4 Stars
NAN% Complete
0
3 Stars
NAN% Complete
0
2 Stars
NAN% Complete
0
1 Stars
NAN% Complete
0
0

Questions