Purisystems 3-Speed Remote Air Filtration System, PuriCare 500 Hanging Air Filter w/RF Remote for Woodworking, Garage Air Purifier, Shop Dust Collector, up to 500 sq. ft(500 CFM)

Model : PuriCare 500

4.7 Average

$239.00 List Price: $250.00

Coupon:

The PuriCare 500 consumes no more than 1.0 Amps and can be placed horizontally on a bench or suspended from the ceiling. Additionally, the PuriCare 500 can generate an airflow of 500 CFM at its peak, which can absorb almost all harmful air particles. This highly concentrated airflow is an essential air-cleaning device for wood carving, sanding, turning, scroll sawing, and dust mixing.

Highlight: Remote control with a built-in timer/ Sheet metal spray shell/ Automatic operation function

【IMPORTANT】 Does not meet California air cleaner regulation requirements; cannot be shipped to California.

Product Overview

PuriCare 500 Air Filtration System/ Dust Collector
The PuriCare 500 air filter system was developed for woodworking shops and do-it-yourself houses with an area of up to 500 sq. ft. The unit is equipped with a powerful 1/8 HP motor that can operate at one of three speeds depending on the situation (i.e. 350, 450 and 500 CFM). You can easily switch between them. In addition, the system can efficiently pick up particulate dust, sawdust, and sawdust from pets, including over 1 micron. The lightweight design weighs only 25.5 pounds, and can be combined with the clever buckle structure and eyebolts on both sides. It is easy to move and install and can meet your unique, complex requirements. PuriCare 500 allows you to breathe cleaner, safer air with confidence.

 

Features

· cETL Certified
· Affordable price
· Sheet metal spray shell with strong corrosion and wear resistance, ensuring that it can withstand harsh environments
· 1/8HP powerful motor with strong airflow and special overload protection to avoid potential fires and explosion hazards
· Sturdy fan blades that reduce noise and increase airflow
· Noise below 61dBA, which is equivalent to a quiet office, according to the U.S. Department of Health and Human Services
· Three speeds:350, 450 and 500 CFM
· One-micron filter and five-micron pre-filter that are easy to clean and replace
· RF remote control with a built-in timer (e.g., 1-12 hours), which works up to 26 feet
· Automatic operation function with continuous operation at the highest wind speed by default (e.g., red/yellow/green)
· Simple color bar shows surrounding air quality
· With the working time timer, you can check the working time of the equipment and consider whether to keep it on
· Cleverly designed buckle handles on both sides, which make it easy to move and install
· Two simple top fixing structures:
Method 1: Four eyebolts are suspended from the ceiling
Method 2: Screw the machine to the wall with four M4 screws.

· Rubber feet prevent the system from marking surfaces

 

Benefits
【Maintain Lung Health】: Inhaling wood dust has been linked to many diseases, such as dermatitis, asthma, various allergies, and cancer. However, simply having a dust collector in your workshop will not provide sufficient protection against this dire consequence. Air filtration systems designed for woodworking workshops can purify the air by capturing particles as small as 0.001 mm. Dust collectors cannot capture particles of this size. Thus, without using an air filter, you risk exposing yourself to life-threatening wood chips that are too minuscule to be caught by other purification systems.
【Clean Your Workshop Even When You Are Away】: It makes sense to keep the PuriCare 500 running after you've left the workshop, but the last thing you want is to leave the unit running all day without needlessly draining power while you're away. With the auto-off feature, you can choose between one and six-hour timers with the included RF remote to clean the air. Thereafter, the system will shut down independently. Avoid having out-of-control electricity bills.
【Easy Installation, Simple Operation, and Low Maintenance Cost】: The PuriCare 500 Filtration System is pre-assembled, so you solely need to determine where to place the unit. Be sure to check out our instruction manual. It's easy to operate and doesn't take much time to learn. When it comes to maintenance, the system doesn't require much attention other than occasional filter changes and weekly cleaning.

Motor 1/8 HP, 115 V/60 Hz, 1.0 A
Air Flow 350, 450 and 500 CFM
Ideal For 500 Sq.Ft
Noise <61 dBA
Cord 5 ft
Dim (L×W×H) 20.1" x 17" x 11"
Shipping Dim(LxWxH) 22.9" x 19.8" x 12.4"
Weight 25.5 lbs
Shipping Weight 30.2 lbs
Loading quantity 20': 308 Sets; 40': 644 Sets; 40'HQ: 736 Sets

Applications
The PuriCare 500 Air Filtration System is designed for wood workshops and DIY homes up to 500 sq. ft. The unit comes equipped with a powerful 1/8 horsepower motor that can operate at one of three speeds (i.e. 350, 450 and 500 CFM) depending on the situation. It is easy to switch between them. Additionally, the system can efficiently handle particle dust, sawdust, and pet sawdust, among others, above 0.001mm. The lightweight design weighs only 25.5 pounds and can be combined with the cleverly designed buckle structure and eye bolts on both sides. It is easy to move and install and can meet your unique, complex needs. PuriCare 500 enables you to breathe cleaner, safer air with confidence. Of course, it's not just that!


Proper Use and Maintenance

Safety Instructions

The power cord of the machine must be plugged into a grounded socket. 
The power supply of the machine must not be higher than the specified power supply. 
Do not use the machine after there is water inside the machine. 
The machine should not be installed outdoors or in places that may be eroded by Rain Water to avoid electricity leakage and fire. 
Do not run the machine without a filter installed 
Refrain from moving the unit during operation
Do not place a shield within the 600mm around the air inlet and outlet of the product.
The machine has to be disconnected from power before it can operate internally. 
If hooks are installed on the ceiling, the load-bearing capacity of the ceiling must be greater than 110 lbs. 
If the dust collector is to be installed on the ceiling, the distance between the bottom of the dust collector and the ground must be greater than 7in. 
Installation requires two people.  


Maintenance and Cleaning
Under poor air quality, there will be a lot of dust in front of the control panel, which needs to be cleaned up.

1. Disconnect the power supply before cleaning.

2. Open the cover next to the button on the machine control panel.

3. Use a brush to dust the lid. Then put the lid on and plug it in.

Reviews & Questions

93% of customers recommend this item

6 Ratings
4.7 Average
5 Stars
500% Complete
4
4 Stars
400% Complete
2
3 Stars
NAN% Complete
0
2 Stars
NAN% Complete
0
1 Stars
NAN% Complete
0
awesome customer service fixes problem in 24 hours

From the Amazon

By 'Eric Mathiesen', Reviewed on April 11, 2023
Although I never found out what caused the system to fail, it appears to have been an easy fix for the manufacturers engineering team. Just sent them an email and within 24 hours they contacted me with a fix to try. This plus the fact that the team that sold it to me offered a full refund says a lot about the product and the company. Great job to them. System worked great then one day system will not run. Cleaned everything checked all wires but have lights, and power past the breaker but system will not start the fan.
Remote

From the Amazon

By 'Paul', Reviewed on February 11, 2023
Instructions about the remote need expansion.
Has an auto-on feature

From the Amazon

By 'Elaine K Noble', Reviewed on January 21, 2023
We got this for our woodworking shop to keep the dust down. It works great and is not very loud. It has a limit setting so you can set a minimum air quality and when the air gets dirtier than that limit, it automatically turns on, and then turns itself off when the air is below the limit. The remote works great. It was easy to install. We have not had to change the filter yet.
Awesome System
By 'Vanessa', Reviewed on July 09, 2022
We use it to clear the air in a powder room. We use an air compressor to clean the filter on a daily basis. Really made a huge difference. I selected this model since it included the ion system. Others for less $$ didn't have this as a feature.
Quiet, small and compact, effective.
By 'Sara', Reviewed on July 08, 2022
Item arrived very fast. It was double boxed and had no damage upon arrival. Unit had all the hardware needed to install and was easy to hang up to the ceiling. Remote works great and this unit really helps to clean the air in my woodworking shop. Wife is happy there is less dust! I will post an update to this review after some more time using the unit.
Quality and Excellence must have been on the designers mind!
By 'Lindsay', Reviewed on June 11, 2022
Right out of the box you can see the high quality of this unit. It's well-maid, easy to use, and so far, it works great. I have a small engine workshop in my garage. My wife and my children were complaining about the odors coming from the workshop, and they were starting to suggest that I move my operation into the shed. (No A/C, No Heat, Not Going to Happen!!) So, my wife suggested that I get an air cleaner or something, and after doing quite a bit of research I chose the PuriCare 500 Hanging Air Filter. It has only been a short while, and already you feel a difference in the quality of air in my shop, and in my attached home. Well worth the price, easy to use, space-saving, and works great! That is exactly what I was shopping for.
2

Questions

Relationship between the displayed number color displayed and the p.m. number input with remote up and down arrows?

James on June 11, 2022

1 Answer

Answered by Alorair
The up and down arrows let you set the desired PM or you can also set it to Continuous Operation mode( CO).

Related Products